Ürünler
Otomasyon sistemlerimizle yaşam alanlarınızı daha akıllı ve verimli hale getirin.
KNX Wall Mount Outdoor Microwave Sensor
KNX Wall Mount Outdoor Microwave Sensor contains four independent logic blocks and one combined logic block. Supported input logical conditions include: Microwave sensing status, brightness value, temperature value, dry contact status and external telegram. The sensor can control lighting, curtain and threshold value.
■ With 2CH constant brightness control function, the sensor supports 4 preset constant values and forced operation dimming.
■ 5 logic blocks with 10 target output for each and supports dry contacts and external telegram locking/unlocking, or delay unlocking. Telegram locking/unlocking can be set to send on/off telegram.
■ Control types: Switch control, Absolute dimming control, Curtain control, Alarm control, Percentage control , Sequence control, Scene control, String(14 bytes) control, Logic combination control.
■ 5 logical condition sources: Microwave sensing status, brightness value, temperature value, dry contact status and external telegram.
■ 2 logical relations: AND, OR
■ 2 working modes: Single mode and Master & Slave mode.
■ 2 dry contact input interfaces can wok as dry contact or LED indicators. The control types of dry contact target output can be set as switch, dimming and scene.
■ The logic validity can be set through external telegram input.
Basic Parameters
Working voltage 21~30V DC
Working current 20mA/30V DC
Communication KNX
Cable diameter of KNX terminal 0.6 - 0.8mm
Microwave detection range Φ28m (Installation height:3m)
Temperature detection range -30°C~70°C
Humidity detection range 20~95％RH
Brightness detection range 0~15000LUX
External Environment
Working temperature -5℃~45℃
Working relative humidity ≤90%
Storage temperature -20℃~60℃
Storage relative humidity ≤93%
Specifications
Dimensions 126×78×114(mm)
Net weight 360g
Housing material ASA, stainless steel
Installation
Wall mount
Protection rating (Compliant with EN 60529) IP20
