Ürünler
Otomasyon sistemlerimizle yaşam alanlarınızı daha akıllı ve verimli hale getirin.
KNX Curtain Motor with Adapter（220V AC)
KNX Curtain Motor 220V AC / KNX Curtain Motor with Adapter is a curtain controller controlled by a KNX panel or other KNX device. The motor can be widely used at home, office, hospital and hotel etc.
■ Automatic travel measurement and supports limit point presetting
■ Enable to open, close, stop and percentage open/close, and supports status response (open, close, stop, percentage open/close, etc.)
■ Enable short drag to start the motor
■ The rotate direction of the motor can be set to forward or reverse.
■ Preset position function, a total of 4 preset positions available
■ Safety control: Control the curtain position according to wind, rain, frost signal, and supports the power-on status recovery after power failure.
■ Auto control: Control the curtain position according to the weather status, heating, cooling signal
■ Scene control function
■ Forced position operation
■ Power-down save function
Basic Parameters
Working voltage 21-30V DC
Working current 6mA/30V DC
Rated input voltage
KNX Curtain Motor 220V AC
AC100-240V (50/60Hz)
KNX Curtain Motor with Adapter
24V DC
Rated input current
KNX Curtain Motor 220V AC: 0.4A
KNX Curtain Motor with Adapter: 1.5A
Communication KNX
Cable diameter of KNX terminal 0.6-0.8mm
Motor rotate torque 1.2N.m
Motor rotate speed 95rpm
External Environment
Working temperature -5℃~45℃
Working relative humidity ≤90%
Storage temperature -20℃~60℃
Storage relative humidity ≤93%
Specifications
Dimensions 283×71×50.6(mm)
Net weight
KNX Curtain Motor 220V AC: 976g
KNX Curtain Motor with Adapter: 874g
Housing material PC, aluminum
Installation Wall hanging
Protection rating (Compliant with EN 60529) IP41
